• info@stuckarch.com
  • Little Rock, AR
How To Fix Crumbling Asphalt Driveway

How To Fix Crumbling Asphalt Driveway

Over time, you will notice some areas of your driveway begins to crumble. And there are several main causes why an asphalt driveway crumbles. One of the most common reasons is that the asphalt has not been properly maintained and has not been sealed or treated with a sealant as needed. This can cause the top layer of the asphalt to wear away and crumble, especially in areas that are exposed to a lot of traffic or weathering.

Another common reason for crumbling asphalt is when the base layer beneath it is not stable or is in poor condition. If the base layer is weak, it can cause the asphalt above it to crack and crumble over time. Additionally, if there are any large rocks or other objects beneath the asphalt, it can cause it to break up and crumble.

In some cases, an asphalt driveway may crumble due to age or damage from weathering. Asphalt driveways usually last around 10-15 years before they start to show signs of wear and tear, so if your driveway is older than that, it’s likely that it will start to crumble eventually. Additionally, if your driveway is located in an area that gets a lot of rain or snow, it may start to deteriorate more quickly.

So how to fix crumbling asphalt driveway? Read more as we’ll tackle this topic in today’s post.


The Many Ways Of Repairing A Crumbling Asphalt Pavement

crumbling asphalt

If your asphalt driveway is starting to crumble, you may be wondering how to fix it. Fortunately, there are a few ways that contractors can fix this problem.

One way to fix a crumbling asphalt driveway is to apply a sealant. This will help to protect the driveway from the elements and will help to keep it looking new.

When a sealant is applied to an asphalt driveway, it is first swept clean. Then, the sealant is applied using a brush or a roller. It is important to apply the sealant evenly, so that it will be effective in protecting the driveway.

Once the sealant has been applied, it is important to allow it to dry completely before walking or driving on the driveway. Otherwise, the sealant may not be effective.

Another way to fix a crumbling asphalt driveway is to resurface it. This involves removing the top layer of asphalt and replacing it with new asphalt. Resurfacing an asphalt driveway can be a big job, so it is important to hire a contractor who has experience doing this type of work.

If your driveway is in really bad shape, you may need to have it completely replaced. This is a more expensive option, but it will give you a brand-new driveway that will last for many years.

Finally, you could patch the cracks in the driveway. This is the cheapest option, but it may not be as effective as the other two options.

There are a few steps involved in patching an asphalt driveway to repair it from crumbling. First, the cracks in the pavement must be cleaned out and filled with a crack filler. Once the filler has dried, the driveway should be swept clean of any remaining debris. Next, a sealant should be applied to the driveway using a brush or roller. Then, the sealant should be allowed to dry completely before walking or driving on the driveway.

Patching an asphalt driveway is not a permanent solution, but it can help to extend the life of your driveway. If you have cracks in your driveway, it is important to repair them as soon as possible to prevent further damage.

No matter which option you choose, be sure to hire a qualified contractor like Denali Paving located in Santa Rosa, CA who knows what they are doing. Otherwise, you may end up with an even bigger mess on your hands.


Tips In Choosing The Right Contractor To Conduct Repairs On Your Crumbling Asphalt Pavement

When your asphalt driveway starts to crumble, it’s important to find a contractor to conduct the repairs as soon as possible. However, with so many contractors out there, how do you know which one to choose? Here are a few tips to help you make the right decision:

  1. Do Your Research – Before hiring a contractor, be sure to do your research and ask around for recommendations. Ask friends, family, and neighbors if they have any good recommendations, or if they’ve had any bad experiences with contractors in the past.
  2. Get Multiple Quotes – Don’t just hire the first contractor you come across – get quotes from several contractors to find the best price.
  3. Check References – Be sure to ask the contractor for references and contact them to find out more about the quality of the work done.
  4. Read Online Reviews – Finally, be sure to read reviews online before making a final decision. This will give you a good idea of what to expect from the professional contractor and can help you make a more informed decision.

Leave a Reply

Your email address will not be published. Required fields are marked *